wavesaircon-logo

What are the top 5 HVAC troubleshooting recommendations for homeowners?

What are the top 5 HVAC troubleshooting recommendations for homeowners?

Having a home comes with a ton of obligations. In addition to paying your mortgage, you must make sure that your home’s systems are all operating properly. The HVAC troubleshooting is one thing you need to make sure is in top shape. This is due to the system’s guarantee of your home’s ideal temperatures and effective airflow between the indoor and outdoor areas.

Especially in the summer when temperatures are too high and in the winter when it’s too cold, improper HVAC maintenance can put you in a bind. As a homeowner, you must be equipped with some fundamental troubleshooting techniques to assist you when the HVAC develops a problem.

You Should Know These 5 Troubleshooting Techniques 

1. Changing Air Filters

HVAC systems that operate inefficiently frequently have clogged, outdated, and unclean air filters. Therefore, knowing how to check and change air filters should be your initial piece of troubleshooting advice. Filters that are blocked or clogged make the system work harder to provide the desired outcomes. This increases energy consumption and wear and tear, which shortens the HVAC’s lifespan. After 90 days, filters should be replaced. If the filters are dirty or ineffective after a month, you can still replace them.

2. Removing debris from the outdoor unit

The outdoor unit can build up leaves, branches, or other solid particles over time because it is typically close to the grass, trees, and other physical objects. These things might prevent air from entering your indoor space freely, which would damage the cooling and air quality. To keep the HVAC system operating at its best, as a homeowner, you can open the air conditioner condenser unit and remove all the debris. In the vicinity of the outdoor unit, you should also trim the trees and eliminate any plants.

3. Cleaning of the ducting, registers, and ventilation

Small objects, such as dirt, dust, and other foreign particles, can attach to or block the vents, ducts, and registers when the AC is circulating air around your home. This may decrease the quality of the air inside your home and decrease the efficiency of the AC. Knowing when to clean the ducts, registers, and vents would be useful. Additionally, since vent and duct cleaning can be challenging, it is advisable to hire a qualified technician.

4. Verify the thermostat

You should be able to determine whether the thermostat is malfunctioning because some HVAC issues are caused by it. You attempt to identify the issue when your system starts up improperly or not at all. First, make sure the thermostat is powered. Change the batteries to see if it solves the issue if it won’t turn on. You might need to speak with a specialist if you reset the temperatures and nothing changes.

5. Examining the circuit breakers and power supply

You should check the electrical supply cords to see if they are in place and if your AC unit won’t turn on at all. If your system can start at all, you should also make sure that the circuit breakers are turned on. Sometimes people may unintentionally turn off switches and breakers, or occasionally power overload may cause the circuit breakers to terminate the power supply. Before you call your technician, double-check to see if your location isn’t experiencing a power outage.

While troubleshooting techniques can assist you in identifying current HVAC issues, not all of them can be fixed by you on your own. It would be ideal if you gave the job to a technician. Call any service provider for all of your HVAC diagnosis, maintenance, and repair requirements.

Share Post: